Scotland's Qualified Electrical Specialists

Kitchen Electrician Glasgow

Request a Quote

Send us your details and we will contact you back to organise a quote.

Quick Enquiry

Professional Kitchen Electrical Installation in Glasgow

Kitchen electrical installation in Glasgow covers every aspect of the electrical work required in a new or refurbished kitchen: from cooker circuit installation and extractor fan wiring through to under-cabinet lighting, socket upgrades, and integrated appliance connections.

A qualified kitchen electrician is essential because kitchens combine high-load appliances, water, heat, ventilation, and frequent socket use, all of which require careful circuit design, correct protection, and properly certified appliance connections.

Bains Electrical carries out kitchen electrical work across Glasgow with careful planning, compliant installation, and clear coordination with your kitchen fitter and other trades.

Our 2026 Global Recognition Award for safety, compliance, and quality electrical work reflects the standard we bring to every kitchen electrical installation in Glasgow. We provide a free estimate before work begins, upfront pricing with no hidden charges, and a quality workmanship guarantee on every job we complete.

Ready to get in touch?

If you’re looking for a Glasgow based electricians that combines traditional Scottish values of honesty and hard work with modern electrical expertise, then get in touch!

Cooker Circuit Installation Glasgow

Why a dedicated circuit matters in every Glasgow kitchen. A cooker circuit is a dedicated high-current circuit that provides the power supply required for a cooker, hob, range cooker, or electric oven. In Glasgow’s older tenement flats and Victorian terraced properties, existing kitchen wiring is often undersized for modern appliances, making a correctly designed cooker circuit installation particularly important. Cable size and protective device selection must be calculated from the appliance rating, circuit route, installation method, cable length and current BS 7671 requirements. We run the circuit to a cooker switch or cooker point positioned within practical reach of the appliance.

Correct sizing and certification on every job. The cooker switch provides a local isolation point, allowing the appliance to be safely disconnected for maintenance without operating the consumer unit. Bains Electrical sizes every cooker circuit correctly for the specific appliance, with RCD protection at the consumer unit and full testing and certification on completion. For range cooker installations, both hob and oven connections may be required, along with careful assessment of the total connected load. We advise on the correct cable size, MCB rating and cooker switch specification for your appliance at the free estimate stage.

Kitchen Lighting Glasgow

Kitchen Rewiring Service Glasgow

Kitchen lighting is one of the most important elements of any kitchen design, and a qualified kitchen electrician in Glasgow ensures your lighting installation is safe, functional, and compliant.

  • Downlights and recessed ceiling lights are among the most popular kitchen lighting choices in Glasgow homes, providing bright, even illumination across the full working area
  • We check dimmer switch compatibility on every job: LED downlights require a compatible dimmer to operate correctly without flickering or premature failure
  • Pendant lights over a kitchen island or breakfast bar require correct cable routing, appropriate ceiling fixings, and proper circuit protection

Bains Electrical installs all types of kitchen lighting across Glasgow, including LED downlights, strip lighting, ceiling spotlights, pendant lights, and smart lighting systems. All kitchen lighting circuits are RCD-protected and correctly fused for the fittings installed.

Under-Cabinet Lighting Installation Glasgow

Under Cabinet Lighting Installation Glasgow

Under-cabinet lighting transforms a Glasgow kitchen workspace, directing light onto the worktop beneath the wall units and removing the shadows left by overhead ceiling fittings.

  • LED strip lighting beneath kitchen cabinets is the most popular choice for Glasgow homeowners, providing bright, energy-efficient task lighting at a low running cost
  • We connect under-cabinet lighting to a dedicated circuit with its own switch, or integrate it into the main kitchen lighting circuit with dimmer control, depending on your design
  • Cables are concealed neatly within the cabinet base or behind a pelmet strip wherever the kitchen layout allows, for a clean and professional finish

Our Glasgow kitchen electricians take the same care with cable routing and concealment as your kitchen fitter, ensuring the completed installation looks as good as it works.

Kitchen Socket Installation Glasgow

Positioning planned for every Glasgow kitchen layout. Kitchen socket positioning must be planned around safety, usability and the specific environment in which outlets will be used. BS 7671 does not prescribe a fixed distance from a kitchen sink, but IET guidance recommends keeping socket outlets at least 300 mm from the sink unit edge where possible. We avoid placing sockets directly above sinks or hobs, where water, steam, heat and trailing cables could present risk. Bains Electrical plans every socket position in Glasgow kitchens so the layout serves everyday use without any reliance on extension leads or adaptors.

Planning, compliance and certification. We plan socket positions in consultation with you and your kitchen fitter to ensure outlet placement works with the kitchen design and meets all requirements under BS 7671 18th Edition wiring regulations, including applicable amendments and Scottish Building Standards. Depending on the scope of the work, kitchen electrical alterations in Glasgow may need to be included in a building warrant or certified through the Scottish building standards process, and Bains Electrical will advise on the appropriate documentation for every element of the work we carry out. We install standard double sockets and combined socket and USB outlets, and we can upgrade an existing ring main to support a larger number of outlets where a new Glasgow kitchen requires it. Socket installation work is certified on completion wherever required.

Extractor Fan Wiring Glasgow

Kitchen extractor fan wiring in Glasgow is more involved than connecting the fan to the nearest circuit, particularly where a ducted system or remote motor is being installed above a hob or island.

  • Glasgow kitchen extractor fans should be supplied through a suitable fused connection, isolator or dedicated switch arrangement according to fan design, circuit layout and manufacturer instructions
  • Ducted extractors that vent externally require the motor unit and control panel to be wired separately in some configurations, with cabling routed away from cooking surfaces and heat sources
  • Recirculating extractors that filter and return air to the kitchen are simpler to wire but still require a correctly rated and fused connection with appropriate isolation

Bains Electrical wires all types of kitchen extractor fans across Glasgow, coordinating with your kitchen fitter to ensure electrical connections are made at the correct stage of the installation.

Kitchen Rewire Near You

Many Glasgow kitchen renovations require electrical work that goes well beyond simple additions to existing wiring, particularly in older tenement and Victorian properties where original circuits were never designed for modern appliances.

  • A kitchen rewire in Glasgow replaces the existing circuits serving the kitchen, providing correctly rated cooker circuits, ring main upgrades and new lighting circuits sized for current appliances
  • Older Glasgow kitchens frequently have inadequate socket numbers, underrated cooker connections or lighting circuits lacking RCD protection, all of which a kitchen rewire corrects
  • We carry out kitchen rewire work in two stages: first fix before kitchen units are fitted, and second fix to connect all outlets, appliances and lighting once the units are in position

Bains Electrical coordinates closely with Glasgow kitchen fitters, builders and project managers to ensure first- and second fix electrical work stays in step with the installation programme.

Integrated Appliance Connection Glasgow

Concealed connections for a clean Glasgow kitchen finish. Modern Glasgow kitchens include a growing number of integrated appliances, from dishwashers and refrigerators to wine coolers, American-style fridge freezers, washing machines and tumble dryers, each of which requires a safe and correctly specified electrical connection. Integrated appliances are typically connected to a fused connection unit or unswitched socket positioned inside the adjacent cabinet, allowing the appliance to be connected and disconnected cleanly without visible cables or surface-mounted sockets.

Load assessment and certification on every job. The fused connection unit or socket must connect to a suitable circuit, whether an existing ring final, a radial circuit or a dedicated supply, depending on the appliance rating and the overall kitchen design. Higher-load or grouped appliances in larger Glasgow kitchens may need separate supplies, careful load assessment or revised circuit arrangements. Bains Electrical works alongside your kitchen fitter to position and connect integrated appliance supplies at the correct stage of the installation, checking fusing, loading, isolation and maintenance access before testing completed connections and issuing the appropriate certification.

Kitchen Electrical Cost Glasgow

The cost of kitchen electrical installation in Glasgow depends on the scope of the work, the number of circuits involved, whether first- and second fix attendance is required and the number of integrated appliances to be connected.

  • A straightforward Glasgow kitchen upgrade involving socket additions and a new cooker circuit will cost less than a full kitchen rewire with new lighting circuits and multiple integrated appliance connections
  • Bains Electrical provides a free estimate at the planning stage, clearly itemising all electrical work so you can build an accurate budget for your Glasgow kitchen renovation
  • Our kitchen electrical costs in Glasgow include labour, materials, testing and certification with no hidden charges at any stage

Costs are agreed and clearly presented before any installation work begins, so your Glasgow kitchen renovation budget is protected from the start.

Kitchen Electrical Certificate Glasgow

Bains Electrical issues the appropriate electrical certificate for all relevant kitchen installation work carried out in Glasgow on completion.

  • New kitchen circuits, including cooker circuits and lighting circuits, require an electrical installation certificate confirming compliance with BS 7671 18th Edition wiring regulations, applicable amendments and Scottish Building Standards
  • We issue a minor works certificate for qualifying additions and alterations made to existing Glasgow kitchen circuits
  • Certificates form a permanent record of all electrical work carried out and may be requested by insurers, mortgage lenders or a future EICR inspector visiting your Glasgow property

Every certificate is prepared accurately to reflect the full scope of the work carried out and is issued to you on the day of completion.

Glasgow Kitchen Electrician Near You

A local kitchen electrician for Glasgow homeowners and landlords. When you need a kitchen electrician near you in Glasgow, Bains Electrical provides a prompt, local response with a team that understands the property types, renovation programmes and installation challenges common across the city. Whether you are refitting a tenement kitchen in the West End, updating the electrics in a Southside sandstone terrace or connecting appliances in a new build development, our kitchen electricians are ready to attend, plan and complete the work to a fully certified standard.

Prompt attendance and transparent pricing. We respond quickly to enquiries from Glasgow homeowners, landlords and kitchen fitters looking for a reliable kitchen electrician near them, and we provide a free estimate before any work begins so costs are clear from the outset. Our team coordinates smoothly with other trades, arrives on time and works to the programme your kitchen renovation requires. Every kitchen electrical installation we complete in Glasgow is backed by our quality workmanship guarantee and supported by the appropriate certification on completion.

Trusted across Glasgow. Bains Electrical is a 2026 Global Recognition Award winner for safety, compliance and quality electrical work, and our kitchen electrical installations reflect that standard on every job. From a single cooker circuit installation to a complete kitchen rewire with integrated appliance connections, lighting and extractor fan wiring, we are the qualified kitchen electrician Glasgow homeowners and landlords rely on.

Award Winning Electricians Glasgow

Trusted and Highly Rated Automotive Services Near You in Glasgow

Customers Reviews!

Hundreds of 5 Star Reviews

One of Glasgow’s Best Rated Electrical Contractors

Kitchen Electrician FAQs

How much does a kitchen electrical installation cost in Glasgow?

Kitchen electrical installation cost in Glasgow depends on the number of circuits, socket positions, lighting points, appliance connections and whether first and second fix attendance is included. A straightforward socket addition or cooker circuit upgrade costs less than a full kitchen rewire with new lighting, extractor fan wiring and multiple integrated appliance connections. Bains Electrical provides a fully itemised free estimate at the planning stage, so the electrical cost is built into your Glasgow kitchen renovation budget before units are ordered.

Do I need a qualified kitchen electrician in Glasgow?

Yes. Kitchen electrical work in Glasgow must be completed by a qualified electrician because it regularly involves new circuits, high-load appliances, socket additions, lighting and extractor fan wiring. The installation must comply with current BS 7671 wiring regulations and Scottish Building Standards. Bains Electrical checks circuit protection, cable routes, isolation, appliance connections, and all certification requirements before work begins, giving you a safe, fully documented kitchen electrical installation.

What is a cooker circuit, and do I need one in my Glasgow kitchen?

A cooker circuit is a dedicated electrical circuit designed to supply a cooker, hob, range cooker or electric oven safely. Many cookers and hobs in Glasgow homes, particularly in older properties where existing wiring was never designed for modern appliances, need a dedicated circuit with correctly sized cable and appropriate protection. Bains Electrical checks your appliance rating, cable route and isolation requirements before recommending the correct cooker circuit installation for your kitchen.

Can you install kitchen lighting during a Glasgow kitchen renovation?

Yes. Bains Electrical installs all types of kitchen lighting during Glasgow renovation projects, including LED downlights, strip lighting, under-cabinet lighting, pendant lights and smart lighting systems. We attend to first fix cabling before units are fitted and return for second fix once cabinets and fittings are in position. Our Glasgow kitchen electricians check dimmer compatibility, circuit protection and switching arrangements before testing and certifying the completed installation.

How many sockets should a Glasgow kitchen have?

The right number of kitchen sockets depends on worktop size, appliance use and the layout of the specific kitchen. A well-planned Glasgow kitchen should have enough accessible sockets for everyday appliances without relying on extension leads or multi-way adaptors. Bains Electrical plans socket positions with you and your kitchen fitter, keeping outlets clear of heat sources, water and trailing cables while maintaining a practical, code-compliant layout.

Can you wire kitchen extractor fans in Glasgow?

Yes. Bains Electrical wires kitchen extractor fans across Glasgow, including recirculating units, ducted extractors and remote-motor island extractors. The wiring method depends on the fan type, control arrangement, ducting route and manufacturer instructions. We coordinate with your Glasgow kitchen fitter so cabling, isolation and final connection all happen at the correct stage of the installation programme. All extractor fan wiring is checked and documented where required.

Do you connect integrated kitchen appliances in Glasgow?

Yes. Bains Electrical connects integrated kitchen appliances in Glasgow homes and rental properties, including dishwashers, washing machines, fridges, wine coolers and tumble dryers. We install suitable fused connection units, sockets or dedicated supplies depending on the appliance rating and kitchen design. Our electricians check loading, isolation and maintenance access before final connection and coordinate with your kitchen fitter so appliance wiring is completed at the right stage.

Can you work around my Glasgow kitchen fitter's schedule?

Yes. Bains Electrical regularly coordinates with kitchen fitters, builders and other trades during Glasgow kitchen renovation projects. We attend to first fix electrical work before units are installed, then return for second fix once your fitter is ready for socket connections, lighting and appliance wiring. Clear communication between trades avoids delays, protects finished surfaces and keeps your Glasgow kitchen installation moving smoothly and to programme.

Is your Glasgow kitchen electrical work guaranteed?

Yes. Bains Electrical backs all kitchen electrical installation and appliance connection work in Glasgow with our quality workmanship guarantee. Our electricians complete every job to current BS 7671 wiring regulations and relevant Scottish Building Standards, then test and certify the work where required. Our 2026 Global Recognition Award reflects our commitment to safety, compliance and quality. Any concern with our workmanship is investigated and resolved promptly.

How much does cooker circuit installation cost in Glasgow?

Cooker circuit installation cost in Glasgow depends on the appliance rating, cable route length, protective device specification, access conditions and available consumer unit capacity. A straightforward cooker circuit in an accessible Glasgow kitchen typically costs less than a longer route requiring chasing, containment or additional remedial work. Bains Electrical checks your cooker, hob or range cooker specifications before providing a clear, free estimate with labour, materials, testing and certification all included.

Is there a kitchen electrician near you in Glasgow?

Yes. Bains Electrical carries out kitchen electrical installations near you across Glasgow, including cooker circuits, sockets, lighting and extractor fan wiring. We coordinate closely with kitchen fitters to keep your renovation on schedule. Call 0141 310 9801 to arrange a free estimate from a kitchen electrician near you.

Kitchen Electrician Glasgow

Areas Covered in Glasgow

Kitchen Electrical Services in Glasgow

Airdrie (ML6), Alexandria (G83), Anniesland (G13), Baillieston (G69), Balloch (G83), Balornock (G21), Bargeddie (G69), Barrhead (G78), Battlefield (G42), Bearsden (G61), Bellshill (ML4), Bishopbriggs (G64), Blantyre (G72), Bothwell (G71), Bridgeton (G40), Broomhill (G11), Burnside (G73), Busby (G76), Calderbank (ML6), Caldercruix (ML6), Cambuslang (G72), Cardonald (G52), Carmyle (G32), Carntyne (G32), Castlemilk (G45), Cathcart (G44), Chryston (G69), Clarkston (G76), Clydebank (G81), Coatbridge (ML5), Croftfoot (G44), Crookston (G53), Crosshill (G42), Cumbernauld (G67), Dalmarnock (G40), Darnley (G53), Dennistoun (G31), Dumbarton (G82), Eaglesham (G76), Easterhouse (G34), Elderslie (PA5), Erskine (PA8), Faifley (G81), Fernhill (G73), Gallowhill (PA3), Garrowhill (G69), Giffnock (G46), Glasgow Harbour (G3), Govan (G51), Govanhill (G42), Gourock (PA19), Greenock (PA15), Hamilton (ML3), Helensburgh (G84), Hillington (G52), Hillhead (G12), Houston (PA6), Howwood (PA9), Hyndland (G12), Ibrox (G51), Johnstone (PA5), Jordanhill (G13), Kilbarchan (PA10), Kilsyth (G65), Kilwinning (KA13), Kirkintilloch (G66), Knightswood (G13), Langbank (PA14), Langside (G41), Lennoxtown (G66), Linwood (PA3), Lochwinnoch (PA12), Largs (KA30), Maryhill (G20), Milngavie (G62), Motherwell (ML1), Muirhead (G69), Neilston (G78), Netherlee (G44), Newarthill (ML1), Newmains (ML2), Newmilns (KA16), Newton Mearns (G77), Nitshill (G53), Oatlands (G5), Old Kilpatrick (G60), Paisley (PA1, PA2, PA3), Parkhead (G31), Partick (G11), Pollok (G53), Pollokshaws (G43), Pollokshields (G41), Polmadie (G42), Port Glasgow (PA14), Possilpark (G22), Renfrew (PA4), Robroyston (G33), Royston (G21), Ruchill (G20), Riddrie (G33), Rutherglen (G73), Shawlands (G41), Shettleston (G32), Simshill (G44), Springburn (G21), Stepps (G33), Thornliebank (G46), Tollcross (G32), Torrance (G64), Toryglen (G42), Uddingston (G71), Viewpark (G71), Waterfoot (G76), Wemyss Bay (PA18), West End (G3), Whiteinch (G14), Wishaw (ML2), Woodlands (G3), Yoker (G14), Yorkhill (G3). Counties and Council areas in and near Glasgow that we cover include – East & West Dunbartonshire, Glasgow City, Inverclyde, North & South Lanarkshire, Renfrewshire and Strathclyde.