House Rewire Near You
A full house rewire replaces all the wiring, sockets, switches and light fittings in your property with modern, safe cabling that meets current BS 7671 wiring regulations, 18th Edition, including applicable amendments and Scottish Building Standards.
If your home has rubber, lead, or aluminium wiring, or if the installation has not been inspected in many years, a rewire is often the safest and most cost-effective solution. Bains Electrical carries out full and partial rewires to a high, certified standard, and we certify every project on completion.
As winners of the 2026 Global Recognition Award for safety, compliance and quality electrical work, our team approaches every rewire with a clear process, careful workmanship and full certification. We provide a free estimate for each project, upfront pricing with no hidden charges, and a guarantee of quality workmanship on every house rewire we undertake.
Ready to get in touch?
If you’re looking for a Glasgow based electricians that combines traditional Scottish values of honesty and hard work with modern electrical expertise, then get in touch!
Home Rewire Scotland
Electrical Rewire Certificate
Warning signs to look for. Knowing whether your property needs a house rewire requires an assessment by a qualified electrician, but several clear warning signs indicate that your wiring is outdated or unsafe. Common signs include visible rubber or fabric-covered wiring, old rewirable fuses rather than a modern consumer unit, a persistent burning smell from sockets or switches, sockets and switches that feel warm to the touch, and recurring circuit failures. Properties with single-core aluminium wiring are also a significant concern, as this material becomes brittle with age and presents a serious fire risk.
Survey first, then decide. Properties that have not had a full electrical inspection in the last ten years, or those being purchased through the open market, are particularly likely to benefit from a professional assessment. A house rewire is not always necessary for the whole property: in some cases, a partial rewire, replacing only the most deteriorated circuits, is sufficient. Bains Electrical will carry out a thorough survey of your property near you and advise you honestly on whether a full or partial rewire is the right approach. We never recommend more work than is genuinely required.
3 Bed House Rewire Cost
House Rewire Cost
The cost of a house rewire depends on the size of your property, the extent of the work required, and the condition of the existing wiring.
- A two-bedroom house rewire is typically the most straightforward, with cost reflecting the smaller number of circuits and outlets involved
- Three-bedroom and four-bedroom properties involve more circuits, more sockets and switches, and longer first and second fix timescales
- The cost of rewiring also includes new consumer unit installation, smoke alarm fitting, and all associated materials and labour
Bains Electrical provides a free estimate for every house rewire project. At the survey stage, we assess the full scope of work and give you a clear, fixed-price proposal with no hidden charges. At the end of the survey, we provide a clear, free estimate so you can decide with confidence.
Average Cost of a House Rewire
House Rewire Certificate
A full house rewiring service replaces every circuit, cable, socket, switch, and light fitting throughout the property from first fix through to second fix.
- The first fix involves running all new cables through walls, under floors, and above ceilings before plastering
- The second fix connects all sockets, switches, light fittings and the new consumer unit once plastering is complete
- On completion, we test and certify the full installation to current BS 7671 wiring regulations, 18th Edition, including applicable amendments and issue an electrical installation certificate
A full house rewire requires coordination with your plasterer after the first fix is complete. We work to a clear programme so that our work fits neatly around other trades, keeping the overall project on schedule.
Rewire a House
House Rewire Price
Planning and preparation. Rewiring a house is a significant project that requires careful planning, full access to the property and a qualified electrician with experience in both first- and second-fix electrical installation. At Bains Electrical, our house rewiring process begins with a detailed survey of your existing wiring. We note the location of all existing circuits; identify any areas of particular concern, such as old rubber wiring or damaged cabling; and plan the routing for all new twin-and-earth PVC cable.
First fix the smoke alarms. We assess the number and position of new sockets, switches and light points based on current usage and current regulations and advise on smoke alarm placement in line with the Smoke Alarm (Scotland) Regulations 2022. During the rewire, we work methodically through the property one area at a time, minimising disruption where possible and keeping you informed at every stage.
Second fix and certification. After the first fix is complete and your plasterer has made good the affected areas, we return for the second fix to connect all outlets and fittings, install the new consumer unit and carry out full testing and certification. We also install interlinked smoke and heat alarms and fit carbon monoxide detectors where required, helping your property meet the relevant Scottish Building Standards on the day we finish.
Electrical Rewiring Cost
Electrical Rewire
Electrical rewiring cost is one of the first things homeowners want to understand before committing to a project, and our free estimate process makes this straightforward.
- We assess every factor that affects electrical rewiring cost: property size, number of storeys, age of existing wiring, and the scope of socket and lighting additions required
- Our estimates are fixed-price and itemised, covering labour, materials, consumer units, smoke alarms and certification
- We do not add charges after the estimate without prior discussion and agreement
Transparent rewire pricing is part of the Bains Electrical commitment to our customers. Once your estimate is agreed upon, you can plan your project with confidence.
Electrical Rewiring House
House Rewiring Contractors
Older properties present specific challenges for rewiring, from cramped floor voids and solid walls to the presence of hazardous legacy wiring materials.
- Rubber wiring and lead wiring, common in homes built before the 1960s, deteriorate over time and must be fully replaced
- Aluminium wiring, installed in some properties during the 1960s and 1970s, requires particular care during removal and replacement
- Victorian properties and tenement flats often have complex layouts that require experienced electricians to rewire efficiently and tidily
Bains Electrical has extensive experience rewiring old properties of all types. We work carefully in older buildings, protect original features where possible, and ensure the finished rewire is tested, certified, compliant, and safe for normal use.
House Rewiring
Electrician for Home Rewiring
Property size is the main factor. The time required to rewire a house depends primarily on the size of the property, the complexity of the existing layout, and the extent of access to floor voids, wall cavities, and roof spaces. For a two-bedroom property, a full house rewire typically takes two to three days for the first fix, allowing time for plastering and making good before the second fix return visit. A three-bedroom house rewire generally requires three to four days of first-fix work, while a larger four-bedroom property may take four to six days.
Working around you. Disruption during a house rewire is unavoidable to some extent: floors may need to be lifted, walls chased, and ceiling roses removed. However, our experienced team works in a structured way that keeps disruption contained and manageable. We advise on the best sequence for room-by-room working so that you can use areas of the house that are already complete while work continues elsewhere. We also ensure that the property is left clean, tidy and safe at the end of every working day.
Electrical Rewiring Service
Commercial Electrical Rewiring
Not every property requires a full rewire. In some cases, only certain circuits or areas of the home have deteriorated beyond safe use.
- A partial rewire targets specific circuits or areas, such as upstairs wiring only, a single floor of a multi-storey property, or circuits serving a particular section of the home
- This approach reduces both cost and disruption compared to a full rewire while still addressing the most critical areas of concern
- After a partial rewire, we certify the work completed and advise on any future phases required
Bains Electrical will give you an honest assessment of whether a partial rewire is appropriate for your property or whether a full rewire is the more cost-effective solution in the long run.
Home Rewiring Services
Home Rewire
The Smoke Alarm (Scotland) Regulations 2022 require all Scottish homes to have interlinked smoke alarms, interlinked heat alarms, and carbon monoxide detectors installed to specific standards.
- Every house rewire carried out by Bains Electrical includes the installation of interlinked smoke alarms in line with current Scottish Building Standards
- We fit heat alarms in kitchens and carbon monoxide detectors in rooms with a carbon-fuelled appliance such as a boiler, open fire or wood burner
- We agree on alarm positions with you at the survey stage to ensure full compliance
Scottish building standards on smoke and heat detection are among the most comprehensive in the UK. Our rewire team ensures your property meets every requirement before we leave.
Full House Rewiring Cost
House Rewiring Service
General guidance on rewire intervals. There is no single fixed interval at which every house must be rewired, but owner-occupied homes are commonly inspected every ten years, and rental properties need an electrical safety inspection before the property is first let and then at intervals of no more than five years. Wiring installed before 1970 is likely to be reaching or past the end of its safe operational life, particularly if it is rubber-insulated or early PVC cable. Even modern wiring can deteriorate faster than expected in properties subject to damp, physical damage or overloading.
When to act. The only way to assess the true condition of your wiring is through a professional electrical inspection carried out by a qualified electrician. If you have recently purchased an older property, or if you are aware that the wiring has never been updated, a house rewire survey from Bains Electrical is the sensible first step. We carry out a full assessment, identify any areas of concern and give you a clear, honest recommendation on whether a full rewire, partial rewire, or other remedial work is the right approach. Call us on 0141 310 9801 to arrange your survey.
Electricity Rewiring
Rewiring of House
Bains Electrical’s electrical rewiring service covers everything from initial survey through to testing, certification and final sign-off.
- We carry out full and partial rewires for homeowners, landlords, buy-to-let investors and property developers
- Our team coordinates with plasterers, builders and other trades to keep your project on programme
- Our fully qualified electricians carry out all rewire work with extensive domestic rewiring experience
Our electrical rewiring service covers projects near you across our approved service area, with every job priced clearly before work begins.
Whole House Rewiring
Rewiring Old Houses
We issue an electrical installation condition report and electrical installation certificate with every completed house rewire issued by the attending qualified electrician.
- The certificate confirms that all work complies with BS 7671 18th Edition wiring regulations and Scottish Building Standards
- It documents all circuits, test results, and observations, forming a permanent record of your new installation
- Landlords require this certification as part of their legal compliance documentation for rental properties
Your house rewire certificate is an important document: keep it safe and provide a copy to any future owner, letting agent, or insurer who requests it. Bains Electrical issues all certificates accurately on the day of completion.
House Rewire Scotland FAQs
How much does a house rewire cost?
House rewire costs depend on property size, age, access and the extent of work required. A typical two-bedroom house rewire starts from a mid-four-figure sum, while larger three- and four-bedroom properties cost more because they involve additional circuits, sockets and labour. Rubber wiring, aluminium wiring and solid walls can also affect pricing. Bains Electrical provides a free estimate after a survey, giving you a fixed price with no hidden charges.
How long does a house rewire take?
Timescales depend on property size, access and how much making good is needed after the first fix. A two-bedroom house rewire usually takes two to three days for the first fix, with a further day for the second fix after plastering. Larger three and four-bedroom homes need more time because there are more circuits, sockets and lighting points. Bains Electrical agrees on a clear programme at the survey stage so you can plan around the work.
How do I know if my house needs rewiring?
Signs that a rewire may be needed include old rubber-covered wiring, single-pin round sockets, a fuse board with rewirable fuses rather than circuit breakers, sockets or switches that feel warm, persistent burning smells, and flickering lights without an obvious cause. Properties built before 1970 are particularly likely to have wiring past the end of its safe operational life. Bains Electrical offers a survey to assess your wiring and advise whether a full or partial rewire is required.
What is included in a house rewire?
A full house rewire includes replacement of all cables, sockets, switches, light fittings, ceiling roses and junction boxes. It also includes installation of a new consumer unit, fitting of interlinked smoke alarms and heat alarms in line with the Smoke Alarm (Scotland) Regulations 2022, and full testing and certification to BS 7671 18th Edition on completion. Where required, we also install carbon monoxide detectors. All materials and labour are included in your agreed estimate.
Do I need to move out during a house rewire?
This depends on the size of your property and personal preference. For smaller properties, some customers choose to remain in the home while work is in progress, though there will be periods without power to some circuits. For larger rewires or where significant disruption is anticipated, moving out temporarily makes the work faster and more straightforward. Bains Electrical will discuss your circumstances at the survey stage and advise on the most practical approach for your specific property.
Is a house rewire messy?
A house rewire involves chasing walls, lifting floorboards and disturbing ceilings in some areas, so some disruption is unavoidable. However, our team works methodically and tidily, minimising the areas affected at any one time. We work room by room, where possible, so that completed areas can be plastered and used while work continues elsewhere. We leave the property clean and safe at the end of every working day and coordinate closely with your plasterer for making good after the first fix.
Do you rewire rental properties and buy-to-let homes?
Yes. Bains Electrical rewires rental properties and buy-to-let homes for landlords who need safe, compliant electrical installations. We certify and document all rewire work, provide the electrical installation certificate for your tenancy records, and advise on interlinked smoke alarm requirements. A completed rewire can also support compliance at the next EICR inspection cycle.
Is a new consumer unit included in the rewire price?
Yes. Bains Electrical includes a new consumer unit as part of every full house rewire. The board will use a compliant metal enclosure and appropriate circuit protection, such as RCDs or RCBOs, selected to suit the installation. We test the consumer unit as part of the full rewired system and include it in the agreed rewire estimate rather than charging for it separately.
Can I get a grant for rewiring my house?
Financial help for rewiring may be available in limited circumstances, but it depends on your local authority, eligibility and the scheme rules in force at the time. Some support is aimed at essential repairs, disability adaptations, low-income households or energy-efficiency work, rather than general rewiring. Bains Electrical can explain the electrical work required and point you towards the relevant council or advice route. Check eligibility before relying on grant funding.
Are you qualified to carry out a house rewire?
Yes. Every house rewired by Bains Electrical is completed by a fully qualified electrician in line with current BS 7671 wiring regulations and Scottish Building Standards. We carry public liability insurance and issue an electrical installation certificate on completion. Our 2026 Global Recognition Award reflects our focus on safety, compliance and quality workmanship.

